Sun, 20 May 2012 00:12:00 +0200 http://www.rpm-performance.nl http://www.rpm-performance.nl/Webwinkel-Product-14125706/M&H-Drag-Slicks-8.5-24.5-13.html http://www.rpm-performance.nl/Webwinkel-Product-14125706/M&H-Drag-Slicks-8.5-24.5-13.html
Application
Fits all car models 

---

]]> Sun, 20 May 2012 00:12:00 +0200 http://www.rpm-performance.nl/Webwinkel-Product-10871328/Honda-Civic-96-00-3D-Hatchback-Stainless-X-bar.html http://www.rpm-performance.nl/Webwinkel-Product-10871328/Honda-Civic-96-00-3D-Hatchback-Stainless-X-bar.html Stainless X-bar 

Application:
1996-2000 Honda Civic Hatchback 3-Doors

---

Most passenger vehicles today are designed with a unibody frame rather than the classic body-on-frame found on older vehicles. Although unibodies are lighter, they were mainly designed for impact absorption so that damage could be isolated into certain areas of the car body. With this in mind, a unibody vehicle would not be suitable for handling because of its natural tendency to flex while cornering. 2 point rear strut braces merely tie up the two shock towers together resulting in the towers moving in unison under hard cornering, which still allows room for unibody flex. By adding a second bar which closes the two opposite corners of a triangle, the shock towers are locked into place for proper weight transfer while cornering. This bar will make 2 point rear strut bars obsolete.  ]]> Sun, 15 Jan 2012 01:33:00 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871326/Honda-S2000-01-09-AP1-AP2-Stainless-Steel-Front-X-bar.html http://www.rpm-performance.nl/Webwinkel-Product-10871326/Honda-S2000-01-09-AP1-AP2-Stainless-Steel-Front-X-bar.html
Application:
1999-2009 Honda S2000 AP1/AP2

---

]]> Sun, 15 Jan 2012 01:29:51 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871324/Honda-Civic-92-95-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Blue.html http://www.rpm-performance.nl/Webwinkel-Product-10871324/Honda-Civic-92-95-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Blue.html
Application:
1992-1995 Honda Civic Coupe/Hatchback 2/3-Doors

---

- Fits Civic hatchback and coupe models.
- 40mm seamless carbon steel, prebent tubing
- bolt on design with bolts & mounting plate
- Will not fit with sunroof.

Our roll bars and cages meet or exceed the safety requirements for most off road track. This will reduces the body roll by 40% or more. Perfect for hard corner tracks /drifting. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean look and feel. These cages are based on the cusco designs and have the same installation points. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require no welding. We do recommend having this installed by a professional and sometimes plastic covers do need to be cutted to be able to install it.

We recommend these bolt-on cages for street/tuningcars that will have a trackday every now and then. If you are a (semi)professional race driver and want your car to be safe for serious track use then we recommend having a fully welded FIA approved roll cage installed instead of these bolt-on cages.  ]]> Sun, 15 Jan 2012 01:26:20 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871323/Honda-Civic-92-95-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Black.html http://www.rpm-performance.nl/Webwinkel-Product-10871323/Honda-Civic-92-95-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Black.html
Application:
1992-1995 Honda Civic Coupe/Hatchback 2/3-Doors

---

- Fits Civic hatchback and coupe models.
- 40mm seamless carbon steel, prebent tubing
- bolt on design with bolts & mounting plate
- Will not fit with sunroof.

Our roll bars and cages meet or exceed the safety requirements for most off road track. This will reduces the body roll by 40% or more. Perfect for hard corner tracks /drifting. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean look and feel. These cages are based on the cusco designs and have the same installation points. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require no welding. We do recommend having this installed by a professional and sometimes plastic covers do need to be cutted to be able to install it.

We recommend these bolt-on cages for street/tuningcars that will have a trackday every now and then. If you are a (semi)professional race driver and want your car to be safe for serious track use then we recommend having a fully welded FIA approved roll cage installed instead of these bolt-on cages.  ]]> Sun, 15 Jan 2012 01:24:39 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871321/Honda-Civic-96-00-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Blue.html http://www.rpm-performance.nl/Webwinkel-Product-10871321/Honda-Civic-96-00-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Blue.html
Application:
1996-2000 Honda Civic Coupe/Hatchback 2/3-Doors

---

- Fits Civic hatchback and coupe models.
- 40mm seamless carbon steel, prebent tubing
- bolt on design with bolts & mounting plate
- Will not fit with sunroof.

Our roll bars and cages meet or exceed the safety requirements for most off road track. This will reduces the body roll by 40% or more. Perfect for hard corner tracks /drifting. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean look and feel. These cages are based on the cusco designs and have the same installation points. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require no welding. We do recommend having this installed by a professional and sometimes plastic covers do need to be cutted to be able to install it.

We recommend these bolt-on cages for street/tuningcars that will have a trackday every now and then. If you are a (semi)professional race driver and want your car to be safe for serious track use then we recommend having a fully welded FIA approved roll cage installed instead of these bolt-on cages.  ]]> Sun, 15 Jan 2012 01:23:13 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871320/Honda-Civic-96-00-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Black.html http://www.rpm-performance.nl/Webwinkel-Product-10871320/Honda-Civic-96-00-2-3D-CSC-6-Point-Bolt-on-Roll-Cage-Black.html
Application:
1996-2000 Honda Civic Coupe/Hatchback 2/3-Doors

---

- Fits Civic hatchback and coupe models.
- 40mm seamless carbon steel, prebent tubing
- bolt on design with bolts & mounting plate
- Will not fit with sunroof.

Our roll bars and cages meet or exceed the safety requirements for most off road track. This will reduces the body roll by 40% or more. Perfect for hard corner tracks /drifting. Our bars and cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while conforming closely to your interior for a clean look and feel. These cages are based on the cusco designs and have the same installation points. All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require no welding. We do recommend having this installed by a professional and sometimes plastic covers do need to be cutted to be able to install it.

We recommend these bolt-on cages for street/tuningcars that will have a trackday every now and then. If you are a (semi)professional race driver and want your car to be safe for serious track use then we recommend having a fully welded FIA approved roll cage installed instead of these bolt-on cages.  ]]> Sun, 15 Jan 2012 01:21:55 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871315/Honda-CRX-88-91-Stainless-Axle-Back-Twin-Exhaust-System.html http://www.rpm-performance.nl/Webwinkel-Product-10871315/Honda-CRX-88-91-Stainless-Axle-Back-Twin-Exhaust-System.html
Application:
1988-1991 Honda CRX

---

 Honda CRX 88-91 Stainless Axle Back Twin Exhaust System

]]> Sun, 15 Jan 2012 01:13:44 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871314/Honda-Civic-Del-Sol-92-00-42mm-Aluminium-Radiator-D-Serie-SOHC.html http://www.rpm-performance.nl/Webwinkel-Product-10871314/Honda-Civic-Del-Sol-92-00-42mm-Aluminium-Radiator-D-Serie-SOHC.html
Application: 
1992-1995 Honda Civic D15/D16
1996-2000 Honda Civic D14/D15/D16
1992-1998 Honda Del Sol D16

---

42mm Aluminum high flow Radiator for the Honda civic 92-00 with the SOHC engine.

Features advanced aluminum brazing process for much more stronger and reliable welds.
Radiators also feature precise OEM fitments tolerance for bolt on installation with/stock clutch or electric fans.

After market electric fan upgrade can also be used for improved cooling efficiency.
High quality Radiators will increase the cooling system heat capacity and dissipation for high performance engine.
This 100% aluminum radiator produce 30% more cooling than your standard radiator.]]> Sun, 15 Jan 2012 01:09:28 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871297/Honda-Civic-CRX-Del-Sol-Integra-4-1-Stainless-Steel-Header-25.html http://www.rpm-performance.nl/Webwinkel-Product-10871297/Honda-Civic-CRX-Del-Sol-Integra-4-1-Stainless-Steel-Header-25.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1996-2000 Honda Civic
1992-1998 Honda Del Sol
1994-2001 Honda Integra DC2

---

-2.5 inch collector full stainless steel header.
-Made of high quality T-304 stainless steel with CNC mandrel-bent tubing.
-O2 sensor insertion, metal gasket and bolts included. Super light weight.
-Add Instant Horsepower (10-15 hp).
-Easy direct bolt-on installation, require NO modification
-DIRECT FIT ON;

Fits Honda Civic/Integra ALL B-Series Engine]]> Sun, 15 Jan 2012 01:03:45 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871271/Honda-Civic-CRX-ITR-Del-Sol-88-00-B-Series-4-2-1-Stainless-Header.html http://www.rpm-performance.nl/Webwinkel-Product-10871271/Honda-Civic-CRX-ITR-Del-Sol-88-00-B-Series-4-2-1-Stainless-Header.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1996-2000 Honda Civic
1992-1998 Honda Del Sol
1994-2001 Honda Integra DC2

---

Stainless steel, tig welded, Gaskets and bolts included. ]]> Sun, 15 Jan 2012 00:52:41 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10871224/Honda-Civic-CRX-Del-Sol-88-00-D-Series-4-1-Stainless-Header.html http://www.rpm-performance.nl/Webwinkel-Product-10871224/Honda-Civic-CRX-Del-Sol-88-00-D-Series-4-1-Stainless-Header.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1996-2000 Honda Civic
1992-1998 Honda Del Sol

---

Stainless steel, tig welded, Gaskets and bolts included. ]]> Sun, 15 Jan 2012 00:20:28 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10842692/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-2x-Front-Disc.html http://www.rpm-performance.nl/Webwinkel-Product-10842692/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-2x-Front-Disc.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1992-1998 Honda Del Sol

---

Stock brake lines are made of rubber which flexes under high pressure, especially when exposed to higher temperatures. As these parts age, the rubber will deteriorate and the amount of flex will increase leading to a soft and spongy pedal. Replacing the rubber lines with stainless braided lines will all but eliminate the flex in the system and provide a firmer, more responsive brake pedal. The stainless steel braiding keeps flex to a minimum while protecting the inner fluid passages from getting damaged by road debris. Stainless braided lines will also maintain the same pedal feel over their life as they not degrade over time like rubber parts.

HEL Performance specialise in the manufacture of all stainless steel braided brake lines and hoses in over 60 countries around the world.

Every modern car has compromises, normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your car. Rubber hoses or mild steel fittings are cheap but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere and that mild steel fittings rust....We manufacture a complete replacement stainless steel brake line kit for any car which is fitted with a hydraulic brake system and as we only ever use stainless steel fittings for the automotive marketplace so we can offer the HEL Lifetime Warranty on all brake line kits.

Manufactured to the highest possible industry standards exclusively by Hose Solutions, the HEL Performance car brake line kits are brand new to the tuning market, building on the worldwide success the product has had in the motorcycle market for the last 10 years, where HEL is the nr.1 brand available.
There are no mild steel components in these kits at all - everything is stainless steel.

All HEL kits come with CNC machined stainless steel fittings, banjo bolts and new copper washers (where applicable), stainless steel braided teflon hose, and PVC protective wipe-clean sleeve.

In our warehouse we normally stock and ship the stainless hoses with transparant sleeve as pictured above. On special order we can get almost any color of sleeves and banjo's.

Attention:
Most cars use 4 brakelines in their brakesystem, 2 on the front and 2 on the rear. Some cars use 5 or 6 lines, or even more. In the title of this product you can find how many lines are included in this set we offer. If it says (4x) or (5x) or (6x) you will get a set for the front AND rear! If it says (2x) you will get a set for the front OR rear (specified in title).
If there is no number specified you will get a set for the front AND rear!   ]]> Fri, 13 Jan 2012 01:36:48 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10842690/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-2x-Rear-Disc.html http://www.rpm-performance.nl/Webwinkel-Product-10842690/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-2x-Rear-Disc.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1992-1998 Honda Del Sol

---

Stock brake lines are made of rubber which flexes under high pressure, especially when exposed to higher temperatures. As these parts age, the rubber will deteriorate and the amount of flex will increase leading to a soft and spongy pedal. Replacing the rubber lines with stainless braided lines will all but eliminate the flex in the system and provide a firmer, more responsive brake pedal. The stainless steel braiding keeps flex to a minimum while protecting the inner fluid passages from getting damaged by road debris. Stainless braided lines will also maintain the same pedal feel over their life as they not degrade over time like rubber parts.

HEL Performance specialise in the manufacture of all stainless steel braided brake lines and hoses in over 60 countries around the world.

Every modern car has compromises, normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your car. Rubber hoses or mild steel fittings are cheap but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere and that mild steel fittings rust....We manufacture a complete replacement stainless steel brake line kit for any car which is fitted with a hydraulic brake system and as we only ever use stainless steel fittings for the automotive marketplace so we can offer the HEL Lifetime Warranty on all brake line kits.

Manufactured to the highest possible industry standards exclusively by Hose Solutions, the HEL Performance car brake line kits are brand new to the tuning market, building on the worldwide success the product has had in the motorcycle market for the last 10 years, where HEL is the nr.1 brand available.
There are no mild steel components in these kits at all - everything is stainless steel.

All HEL kits come with CNC machined stainless steel fittings, banjo bolts and new copper washers (where applicable), stainless steel braided teflon hose, and PVC protective wipe-clean sleeve.

In our warehouse we normally stock and ship the stainless hoses with transparant sleeve as pictured above. On special order we can get almost any color of sleeves and banjo's.

Attention:
Most cars use 4 brakelines in their brakesystem, 2 on the front and 2 on the rear. Some cars use 5 or 6 lines, or even more. In the title of this product you can find how many lines are included in this set we offer. If it says (4x) or (5x) or (6x) you will get a set for the front AND rear! If it says (2x) you will get a set for the front OR rear (specified in title).
If there is no number specified you will get a set for the front AND rear!   ]]> Fri, 13 Jan 2012 01:35:23 +0100 http://www.rpm-performance.nl/Webwinkel-Product-10842689/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-4x-Disc.html http://www.rpm-performance.nl/Webwinkel-Product-10842689/Honda-Civic-CRX-Del-Sol-88-95-Stainless-HEL-Brakelines-4x-Disc.html
Application:
1988-1991 Honda Civic
1988-1993 Honda CRX
1992-1995 Honda Civic
1992-1998 Honda Del Sol

---

Stock brake lines are made of rubber which flexes under high pressure, especially when exposed to higher temperatures. As these parts age, the rubber will deteriorate and the amount of flex will increase leading to a soft and spongy pedal. Replacing the rubber lines with stainless braided lines will all but eliminate the flex in the system and provide a firmer, more responsive brake pedal. The stainless steel braiding keeps flex to a minimum while protecting the inner fluid passages from getting damaged by road debris. Stainless braided lines will also maintain the same pedal feel over their life as they not degrade over time like rubber parts.

HEL Performance specialise in the manufacture of all stainless steel braided brake lines and hoses in over 60 countries around the world.

Every modern car has compromises, normally instigated by accountants rather than engineers. One such compromise is the materials used for the brake hoses on your car. Rubber hoses or mild steel fittings are cheap but we all know how rubber hose bulges under pressure, allows brake fluid to absorb water vapour from the atmosphere and that mild steel fittings rust....We manufacture a complete replacement stainless steel brake line kit for any car which is fitted with a hydraulic brake system and as we only ever use stainless steel fittings for the automotive marketplace so we can offer the HEL Lifetime Warranty on all brake line kits.

Manufactured to the highest possible industry standards exclusively by Hose Solutions, the HEL Performance car brake line kits are brand new to the tuning market, building on the worldwide success the product has had in the motorcycle market for the last 10 years, where HEL is the nr.1 brand available.
There are no mild steel components in these kits at all - everything is stainless steel.

All HEL kits come with CNC machined stainless steel fittings, banjo bolts and new copper washers (where applicable), stainless steel braided teflon hose, and PVC protective wipe-clean sleeve.

In our warehouse we normally stock and ship the stainless hoses with transparant sleeve as pictured above. On special order we can get almost any color of sleeves and banjo's.

Attention:
Most cars use 4 brakelines in their brakesystem, 2 on the front and 2 on the rear. Some cars use 5 or 6 lines, or even more. In the title of this product you can find how many lines are included in this set we offer. If it says (4x) or (5x) or (6x) you will get a set for the front AND rear! If it says (2x) you will get a set for the front OR rear (specified in title).
If there is no number specified you will get a set for the front AND rear!]]> Fri, 13 Jan 2012 01:32:11 +0100